Guide

Fix a quiet voice in a screen recording on a Mac.

You play back a good take and can hardly hear yourself. A quiet voice can usually be saved afterwards. Here is how to do it for free in iMovie, and how ScreenGo tells you when the level is right.

The free way: turn it up in iMovie

iMovie is free from the Mac App Store. It can raise a clip's volume, take out some background noise and change the tone with an equaliser.

  1. Drag your recording into a new iMovie project and click the clip in the timeline to select it.
  2. Click the Volume button, then click Auto. iMovie raises the clip's average volume.
  3. To set it yourself, drag the horizontal line across the clip's waveform upwards. iMovie shows the level as a percentage while you drag.
  4. Watch the waveform's colour. Yellow peaks mean distortion and red means clipping, so lower the line until the waveform is all green.
  5. If turning it up also brings up a hum or a fan, click the Noise Reduction and Equalizer button, select Reduce background noise and drag its slider. Play the clip to check it.
  6. If the voice sounds thin or boomy, try a preset from the Equalizer menu. Then export the movie.

This costs nothing and often does the job. The colours warn you when the voice is too loud, but nothing tells you when it is loud enough, so you judge by ear on whatever speakers you have. Turning the voice up also turns up the room, the fan and the keyboard.

With ScreenGo: a level check and a Gain slider

ScreenGo measures your microphone when a recording opens in the editor, then tells you whether the voice needs more gain or less.

  1. Press Stop and the editor opens, or select a recording in the Library and click Edit.
  2. Look at the Voice lane at the foot of the timeline. Its right end says Quiet · add gain in Audio, Good level or Too hot.
  3. Click the Audio tab in the inspector. Under Voice, a note gives the loudest moments and the speech level in dB.
  4. Drag Gain until the note says Good level. If it says Quiet, the link beside it, such as Use +12.0 dB, sets the gain that brings the loudest moments to about −3 dB.
  5. For hum, hiss, a fan or keyboard noise, turn on Voice isolation (AI) and set its Strength.
  6. To change how the voice sounds, choose a Tone: Warm, Bright, Radio or Clear. The curve under it shows what each one does to the bass and treble. Then export.
The Voice settings in ScreenGo's editor, raising a quiet recording until the note says Good level. The original microphone file is never changed.

Your original microphone file is never changed. ScreenGo processes the voice once on your Mac and saves it as a separate file beside the recording, and exports use that. Change a setting later and it simply processes it again.

Silent or nearly silent: check these first

  • A MacBook with its lid closed records silence. On every Apple silicon MacBook, and on Intel ones with the T2 chip, the built-in microphone is switched off in hardware while the lid is shut. If you work on an external monitor with the lid closed, plug in another microphone or open the lid. No amount of gain brings back a voice that was never recorded.
  • Look before you record. The Microphone card on ScreenGo's main page shows the live level in dB as you speak, and warns you when the MacBook's microphone is chosen and the lid looks closed.
  • Get closer to the microphone. The nearer you are, the louder your voice is compared with the room. Gain turns both up together, so it can't change that balance afterwards.
  • Too loud is worse than too quiet. A quiet voice can be raised. Clipped peaks are flattened for good, so leave some room at the top.

Questions

Does more gain make background noise louder?

Yes. Gain raises everything the microphone heard. Turn on Voice isolation (AI) as well: it is Apple's voice isolation, run on your Mac, and it takes out hum, hiss, fans and keyboard noise.

What do the numbers in ScreenGo's note mean?

The first is the loudest moment in the recording, the second is the level of the louder third of the recording, so pauses don't pull it down. 0 dB is the most a file can hold. ScreenGo aims for peaks near −3 dB and speech around −18 dB.

Can I undo the change?

Yes. Drag Gain back to +0.0 dB, or press Command-Z. The original recording stays as it was.

ScreenGo for Mac

£34.99one-time purchase

Get ScreenGo

No subscription and no account. For Apple silicon Macs with macOS 26 or later. The Mac App Store shows the price in your own currency.